ALL INTERNAL COMBUSTION ENGINES UP TO 250 HORSEPOWER
HYDRAULIC SYSTEMS UP TO 250 GALLONS
PORTABLE HYDRAULIC CLEANING
MAXIMUM OPERATING PRESSURE:
|MAXIMUM FLOW RATE:||0.5 GPM|
|INLET/OUTLET CONNECTION:||3/8” NPT|
|BOTTOM DRAIN:||¼” NPT|
|DIMENSIONS:||(H) 17.25” (W)7.00” (D) 8.00”|
BY PASS OIL FILTERS
Gulf Coast Filters has over 20 years experience dealing with bypass oil filtration in the trucking industry. We have spent thousands of hours monitoring oil analysis reports and helping our customers achieve the maximum life out of their engines. The secret to longer engine life and extended oil change intervals is pretty simple, keep the oil in new or near new quality at all times. Factory oil filters are not designed to purify the oil but mainly to filter all the oil at a high rate before it gets to the engine, and by having such a high flow rate is unable to trap the microscopic particles that enter the oil. The Gulf Coast Filter is a bypass filter and cleans the oil at only 2 quarts a minute flow rate allowing the microscopic particles to become trapped in the dense element. The element also removes moisture, the key ingredient for acid. The additives in your oil are there to combat the contamination and hold it in suspension until the oil is changed. The Gulf Coast Filter removes the majority of microscopic contamination and therefore your additives have little to combat against and are not depleted. When you change the Gulf Coast Filter you will add new make up oil to an already clean sump of oil that insures your oil is within new to near new oil quality guidelines at all times. Where’s the proof? Gulf Coast Filters tracked a 1990 Peterbilt with a 425 HP Series 60 Detroit for over 1 million miles with only 2 oil changes and no overhaul. The first oil change was at 19,000 miles (break-in); the second was at 250,000 when a leaking oil pan gasket was replaced. One of our customers, Pepsi Cola of Gulfport, MS has been running Gulf Coast Filters for over 20 years on their fleet while not changing oil and getting longer life from their engines. Our goal at Gulf Coast Filters is very simple, save our customers an average of 70% on oil changes and allow them to run their engine many more miles between overhauls. Gulf Coast Filters offers an oil analysis program to our customers in which we keep a file and monitor your oil samples for you giving you the peace of mind that you know what is going on inside your expensive engine. All Gulf Coast Filters filtration units carry a lifetime warranty for the original user. Gulf Coast Filters also offers a full 100% satisfaction guarantee on up to 6 units for all our filtration products. (See you dealer for details)
SAVE OVER 70% ON OIL CHANGES
TRUCKING - The average owner operator spends over $100.00 to change oil in their truck, the average Gulf Coast Filter user spends about $30.00 to change the Gulf Coast Filter and add the make up oil. If the average owner operator were to keep their truck 5 years they could save over $4200.00 by using the Gulf Coast Filter.
GULF COAST FILTERS BY PASS OIL FILTERS
|ALL GAS ENGINES AND SMALL DIESEL GENERATORS|
|O-1 -||DIESEL ENGINES FROM 80-250HP|
|O-2 -||DIESEL ENGINES FROM 250-500HP|
|2XO-2M -||DIESEL ENGINES FROM 500-1000HP|
Typical Gulf Coast Filter change intervals are every 200 hours.NOTE: For pleasure boats with limited space, a Model O-1 can be used with shorter filter change intervals. Example: An O-1 installed on a 400 HP engine would require 100-hour filter change intervals.
Gulf Coast Filters Oil Analysis Program
Gulf Coast Filters developed this program to give our customers the peace of mind by knowing the condition of their oil and
eliminating any “guessing” of when to change their oil. We monitor your oil analysis reports and let you know when an oil change is needed.
Gulf Coast Filters uses Titan Laboratories for all of our oil samples. Titan is a very prestigious laboratory and offers us a great deal of
information on the report and also consistency.
How do you become a member? Click here