Gulf Coast Filters Specializing in Bypass Oil filters, Fuel filters, Hydraulic filters and Custom filtering

 

 

Gulf Coast Filters

Home
About Us 
Customer Comments
Links
Store
Meet Some Of Our Customers
Products
Frequently Asked Questions
Why do we change oil
How do I eliminate routine oil changes
Why Bypass Filters
Our Guarantee
Pricing
Contact us
Filter Installation
GCF Element Change Instructions
 

Oil Analysis

GCF Oil Analysis program
 

The Oil Quality

Mobil
 

Articles/Reviews

1,000,000 Miles We Did It
Power Stroke Registry Review
North Carolina D.O.T
Turbo Diesel Registry Magazine
 

GCF Customers

Pepsi Cola Letter
Satisfied Users
Other Letters
 

Test Results

GCF vs. small competitor filter
Offshore Drilling
Company
Scott Paper Co.
 

Gulf Coast Filters
Manufacturing
High Quality Filters
for Over 30 Years!

 

 

MODEL # 2XF-1M
FUEL FILTER/WATER SEPARATOR MANIFOLD SYSTEMS

BENEFITS

  • BELOW 1 MICRON FILTRATION
  • 99.9% MOISTURE FREE FUEL
  • 128 OZ WATER SEPARATION CAPABILITY 
  • NO GASKET REPLACEMENT
  • NO TOOLS REQUIRED TO SERVICE
  • EACH FILTER CAN OPERATE INDEPENDENTLY FOR SERVICING WHILE ENGINES ARE RUNNING
  • U.S.C.G. ACCEPTED

APPLICATIONS

  • THIS SYSTEM WILL ACCOMMODATE FLOW RATES UP TO 4 GPM.  THE 2XF-1M MEETS THE FUEL PUMP DEMANDS FOR MOST 12 CYL ENGINES AND MANY 4-STROKE 16 CYL ENGINES

SPECIFICATIONS

GCF ELEMENT REQUIREMENTS:            

2
PARTICLE REMOVAL: BELOW 0.5 MICRONS
WATER REMOVAL CAPACITY: 1 GALLON
MAXIMUM OPERATING PRESSURE: 90 PSI
MAXIMUM FLOW RATE: 4 GPM
INLET/OUTLET CONNECTION: 1/2 NPT
DIMENSIONS: (H) 25.50  (W) 11.50  (L) 20
WEIGHT: 85 LBS

FUEL FILTERS

If you are the owner of a diesel engine, you will one day have to deal with contaminated fuel problems.  If you are a boat owner, you probably already have.  Engines can run on dirty oil, but dirty fuel will shut you down and when this happens hopefully you will be in calm seas with plenty of time to deal with it.  You are well aware of the consequences of stalled engines in a critical situation.  Gulf Coast Filters manufactures the finest fuel water separator on the market.  Our fuel filter contains a water separator with a 64 oz capacity and a massive sub-micron filter element that will hold substantial amounts of contamination.  These two features will allow you to run longer between filter changes.  We also offer a electronic water indicator.  Why should you have to go down in the engine room and take the time to check your fuel bowl, which in many cases is dirty with limited visibility?  Install our system and the indicator light will let you know when to drain the water.  Have you ever had to take apart a fuel bowl on a water separator for maintenance?  Did you have the right size wrench?  Did you drop a bolt down in the bilge and not have a spare?  With the Gulf Coast Filter all you do is reach down in the filter and pull out the fuel baffle, wipe it off and put it back with no tools.  Other features include a filter housing that is extremely heavy-duty and built to last the life of the your equipment, no gasket change every service, and a patented non-cross threading lid assembly.

FUEL POLISHING

Pleasure boats sit for long periods of time allowing algae and other contamination to grow in the tanks, and when the boat is used the fuel begins moving around and clogging filters.  Dirty fuel and water contamination can cause the following problems:  Bad injectors, rusty fuel tanks, and poor engine performance.  Gulf Coast Filters offers a fuel polishing system that will continue to circulate your fuel while the boat is sitting at the dock, giving you peace of mind before heading on your next trip.  When you are ready to use the boat you can switch back over from polishing to full flow for running your engines.  The U.S. Army National Guard has used Gulf Coast Filters to polish fuel in the M-1 Tanks for over 10 years.  The M-1s also sit for long periods of time giving them the same problems as the pleasure boats.

 

GULF COAST FILTER FUEL WATER SEPARATORS

MODEL F-1 - RATED AT 2 GALLONS PER MINUTE
MODEL 2XF-1M - RATED AT 4 GALLONS PER MINUTE
MODEL 3XF-1M - RATED AT 6 GALLONS PER MINUTE
MODEL GCF-POL1-  FUEL POLISHING SYSTEM WITH 1 MODEL F-1
MODEL GCF-POL2- FUEL POLISHING SYSTEM WITH 2XF-1M

 

Home page / About us / Contact us

Copyright © 2002-2005 Gulf Coast Filters, Inc.  All Rights Reserved.
Gulf Coast Filters
P.O. Box 2787
Gulfport, MS  39505
1-866-728-3582